Ultratherm under tank Heat Pad

Ultratherm under tank Heat Pad

11"x11" model- 15 watts, can be used with the 24" and up size cages.
11"x17" model- 22 watts, can be used with the 36" and up size cages.
11"x23" model- 30 watts, can be used with the 36" and up size cages.

These are only for belly heat and will not heat the cage.
These do not come attached to the cage, you will need to tape it on and it should have a air space between the cage and floor, you can use 1x1 furring strips from the hardware stores and paint them black, don't forget to support the center of the cage bottom as well.

Ultratherm Vivarium Heaters have been manufactured in Scotland for over 20 years to exacting European Standards. UL Listed component.

We sell only the higher quality, more durable fiberglass element models- NOT the printed.

These pads can often be used WITHOUT a thermostat due to their low wattage density. The element is similar to the Flexwatt heat tape but it is a far more durable, longer lasting material and is sealed in a polyurethane.

The low wattage density of this product means in most cases it will maintain "reptile friendly" temps below 95 degrees. This can vary with the room temps and cage thickness so if precise control of temperature is needed these pads can also be used with a thermostat/rheostat.

Sorry but I am not offering this product anymore so please purchase it from Reptile Basics

Price: $0.00

Comments are closed.